Scroll to top ⬆
Loading...

Login

Status

No call log entries.
Status: ●
Status:
●
Background conn. status:
● DAPNET | ● APRS
Active config profile:
Active connector:
Modem mode:
Modem RX/TX frequency, power:
Connected to:

Log

No log entries.

openSPOT4 Pro info

Battery:
initializing...
USB current limit:
Hardware release:
Firmware version:
v
Firmware built at:
Bootloader ID:
Device UID:
Uptime:
Device time:
RSSI ▸
BER ▸
Dejitter queue ▸

Connectors

Active connector:
Edit connector:

General settings

Change to Null connector after last call (sec, 0 to disable):
Change after last call from:
Modem Modem or network

Null connector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:

DMR/DMRplus dongle

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
DMR ID:
Reflector (or XLX module):
Reflector ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

DMR/Homebrew/MMDVM

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Protocol:
Homebrew MMDVM
Server:
Server address:
Port (UDP):
Callsign:
DMR ID:
URL:
Server password: (show)
Backup server:
Backup server address:
Backup server port (UDP):
Backup server password: (show)
Backup server activate connect timeout (sec):
Auto connect to ID (0 to disable):
Group call Private call
Auto connect TDMA channel:
Auto connect interval (sec):
DMO mode TDMA channel:
Route cross mode calls to ID:
Group call Private call
Reroute DMR TG9 calls to ID (0 to disable):
Group call Private call
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

D-STAR/DCS/XLX

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Module:
Server address:
Port (UDP):
CCS port (UDP):
Callsign:
Local module:
Reflector ID:
Remote module:
RX timeout (sec):
Connect retry interval (sec):

D-STAR/REF/XRF (DPlus/DExtra)

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Mode:
Reflector Gateway
Server:
Module:
Server address:
Port (UDP):
CCS port (UDP):
Callsign:
Local module:
Reflector/gateway ID:
Remote module:
RX timeout (sec):
Connect retry interval (sec):

System Fusion/FCS

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server / room number:
Server address:
Port (UDP):
Callsign:
DMR/CCS7 ID:
Reflector:
Room number:
DGID list (separate IDs with ;):
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

System Fusion/YSFReflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
DGID list (separate IDs with ;):
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

SharkRF IP Connector Client

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
ID:
Server password: (show)
Callsign:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

SharkRF IP Connector Server

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Port (UDP):
Server password: (show)
RX timeout (sec):

AutoCal

AutoCal analyzes an incoming transmission and tries to find out the frequency difference (RX offset) between the openSPOT4 and the transmitter.

Make sure the correct modem mode is selected. Hold the PTT button on your radio until all 3 phases are completed.
Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Phase:
Status:
Progress:
Last found offset:
N/A

DAPNET

This connector uses the POCSAG frequency which can be set on the Settings page, POCSAG settings section.
Modem mode:
Server:
Server address:
Port (TCP):
Use your DAPNET transmitter login and auth key here. These are not the same as your DAPNET user account. A separate transmitter registration is needed. See this page for more information.
Transmitter callsign:
Transmitter auth key: (show)
RX timeout (sec):
Connect retry interval (sec):

Only transmit specified RICs

RIC #1:
RIC #2:
RIC #3:
RIC #4:
RIC #5:
RIC #6:
RIC #7:
RIC #8:

NXDNReflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
Talkgroup ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

APRS

This special background connector can be used for setting up a connection to the APRS network. This enables device location broadcasting, forwarding GPS position data from transceivers, and messaging (APRS chat).
Server:
Server address:
Port (TCP):
Callsign:
RX timeout (sec):
Connect retry interval (sec):
Send incoming messages to POCSAG RIC (0 to disable):

Device location

QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (ASL, meters):
Location symbol on map (select):
Location comment:

D-STAR location forwarding

Forced SSID:
Forced symbol (select):
Forced comment:

C4FM location forwarding

Forced SSID:
Forced symbol (select):
Forced comment:
Note: DMR location forwarding to the APRS network is done by the DMR server, not the openSPOT4. Please check the used DMR network's documentation on how to set up your radio.

P25Reflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
Talkgroup ID:
Reroute group calls from net to ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

POCSAG/DAPNET

Message queue
No messages
State:
Current timeslot:
Send to:
DAPNET Modem
Message:
Destination callsign:
Destination transmitter group:
Destination transmitter group ID:
Type:
Message Alert message Alert

DAPNET login information

DAPNET callsign:
DAPNET user password: (show)
Use your DAPNET user (not transmitter) callsign and password key here. These are required for sending messages to DAPNET.

ID database lookup

ID or callsign:
Type:
DMR/P25/CCS7
DMR talkgroup
NXDN

Upgrade

State:

Modem settings

Active modem mode:
Change to mode:

Frequency

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Transmit power:

CW ID

ID to transmit:
Speed (WPM):
Interval (sec):
TX delay (sec):

Modulation

Modulation mode:
Inner deviation (Hz):

Other settings

Call hang time (ms):
BCLO level (dBm, 0 - off):
Ignore RX after TX (ms):
Sensitivity level:
Filter gain:
AGC low threshold (dBm):
AGC high threshold (dBm):

Configuration profile

Change active profile

Active profile slot:
Change to profile slot:

Change profile on timeout

Change after last call (sec, 0 to disable):
Change after last call from:
Modem Modem or network
Change to profile slot:

Profile names

Profile #1:
Profile #2:
Profile #3:
Profile #4:
Profile #5:
Profile #6:
Profile #7:
Profile #8:
Profile #9:
Profile #10:

Copy

Source:
Destination:

Export/import file

Profile:
Status:
Idle
Progress:

Miscellaneous profile settings

Firmware upgrade

Auto upgrade at (hh:mm):
Auto upgrade RX/TX delay (sec):
Check interval (hour):

Voice announcements

Server:
Server host:
Server port (UDP):
Net state announcement int. (sec):
Source ID:
Profile query/change base ID:
Connector query ID:
Connector query callsign / DTMF:
.......I (replace 7 dots with 7 spaces, or DTMF D)
Connector query DTMF code:
IP address query ID:
IP address query callsign / DTMF:
.......A (replace 7 dots with 7 spaces, or enter DTMF B)
IP address query DTMF code:
Battery status query ID:
Battery status query callsign / DTMF:
.......B (replace 7 dots with 7 spaces, or enter DTMF C)
Battery status query DTMF code:
Time query ID:
Time query callsign / DTMF:
.......T (replace 7 dots with 7 spaces, or enter DTMF CD)
Time query DTMF code:
Time announcement interval:

Location settings

Click here if you want to set up sending the device location to the APRS network.
QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (AGL, meters):
Height (ASL, meters):
Description (city, country):

DMR settings

Color code (CC):
Echo ID:
Preferred talkgroup list:
Cross mode destination DMR ID:
Default cross mode source DMR ID:
Force source ID from modem (0 - disable):
Force talker alias to network:

D-STAR settings

Echo callsign:
Dst callsign for cross calls:
Forced src callsign for cross calls:
Forced src suffix for cross calls:
Default callsign for cross mode calls:
Force message to D-STAR network in cross mode:

C4FM settings

Special command/cross mode private call DTMF code:
Cross mode group call DTMF code:
Default callsign for cross mode calls:
Echo DGID:
DGID from modem:
Replace DGID to modem:
Replace DGID to net:
Cross mode DGID to net (default 0):

NXDN settings

Radio Access Number (RAN):
Echo ID:
Default cross mode destination ID:
Default cross mode source ID:

P25 settings

Network Access Code (NAC):
Echo ID:
Default cross mode source P25 ID:

POCSAG settings

POCSAG frequency (MHz):
Bitrate:
TX delay in other modem modes (sec):

Allowed timeslots

Transcode gain settings

DMR to D-STAR (dB):
DMR to C4FM (dB):
DMR to NXDN (dB):
D-STAR to DMR (dB):
D-STAR to C4FM (dB):
D-STAR to NXDN (dB):
C4FM to DMR (dB):
C4FM to D-STAR (dB):
C4FM to NXDN (dB):
NXDN to DMR (dB):
NXDN to D-STAR (dB):
NXDN to C4FM (dB):

Lock settings

ID #1 (0 to disable):
ID #2 (0 to disable):
ID #3 (0 to disable):
Callsign #1 (empty to disable):
Callsign #2 (empty to disable):
Callsign #3 (empty to disable):

Call mute settings

ID #1 (0 to disable):
ID #2 (0 to disable):
ID #3 (0 to disable):
ID #4 (0 to disable):
ID #5 (0 to disable):
Callsign #1 (empty to disable):
Callsign #2 (empty to disable):
Callsign #3 (empty to disable):
Callsign #4 (empty to disable):
Callsign #5 (empty to disable):

Beeper

Volume:
Morse code WPM:

RTC

Wakeup at (hh:mm):
Change profile on wakeup to:
Powerdown at (hh:mm):

Call audio

Miscellaneous

Power off delay (minutes):
App LED brightness:

Network status

Wi-Fi status:
Connected to:
RSSI:
▸
Internet connection quality:
● (unknown)
Wireless regulatory domain:

Current configuration

IPv6 mode:
IPv6 addresses:
IPv4 mode:
IP address:
Netmask:
Gateway:
DNS mode:
DNS server #1:
DNS server #2:
Traffic ▸
Network RX total:
N/A
Network TX total:
N/A

Network settings

Country of operation:
Change web int. password: (show)
Hostname:
Dejitter queue length (ms):
Power down if no Wi-Fi connected for:
(minutes, only if discharging, 0 to disable)
Syslog server:
Syslog port (UDP):

NTP settings

NTP server:
NTP last sync at:
NTP last synced to:
Device time:

Wireless scan

No scan results available.

Wireless settings

SSID #1:
Key #1: (show)
BSSID #1:
SSID #2:
Key #2: (show)
BSSID #2:
SSID #3:
Key #3: (show)
BSSID #3:
SSID #4:
Key #4: (show)
BSSID #4:
SSID #5:
Key #5: (show)
BSSID #5:

Access point mode settings

AP SSID:
AP key:
Channel number:

IP settings

MAC settings

Active MAC address:
Custom MAC address:
Browser client MAC address:
Factory MAC address:

Quick setup

Please select the type of your radio.
Do you want to set up location broadcasting and forwarding GPS position data from your transceiver to the APRS network?

Owner information

Please enter your callsign and IDs below, and then click on the Save button. You can ignore the IDs in case you don't have them (you can register a DMR ID here).
Callsign:
DMR/P25/CCS7 ID:
NXDN ID:

Web interface mode

Quick setup

General DMR settings

Radio frequency (MHz):
Color code:
Do you have voice quality issues? Run
Please select the network/server type to continue.

Quick setup

DMR/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this talkgroup:
(set to 0 if not needed)

Quick setup

DMR/ DMRplus / MARC / TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Link reflector/talkgroup (set to 0 if not needed):

Quick setup

DMR/REF/XRF

Server:
Module:
Callsign:

Quick setup

DMR/DCS/XLX

Server:
Module:
Callsign:

Quick setup

DMR/Gateway

Server:
Module:
Callsign:

Quick setup

DMR/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

DMR/YSFReflector

Server:
Callsign:

Quick setup

DMR/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

DMR/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

DMR/NXDNReflector

Server:
Callsign:

Quick setup

General D-STAR settings

Radio frequency (MHz):
Please select the network/server type to continue.

Quick setup

D-STAR/REF/XRF

Server:
Module:
Callsign:

Quick setup

D-STAR/DCS/XLX

Server:
Module:
Callsign:

Quick setup

D-STAR/Gateway

Server:
Module:
Callsign:

Quick setup

D-STAR/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this talkgroup:
(set to 0 if not needed)

Quick setup

D-STAR/ DMRplus / MARC/ TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Link reflector/talkgroup (set to 0 if not needed):

Quick setup

D-STAR/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

D-STAR/YSFReflector

Server:
Callsign:

Quick setup

D-STAR/NXDNReflector

Server:
Callsign:

Quick setup

D-STAR/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

D-STAR/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General C4FM settings

Radio frequency (MHz):
Radio deviation mode:
Normal Half
Please select the network/server type to continue.

Quick setup

C4FM/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

C4FM/YSFReflector

Server:
Callsign:

Quick setup

C4FM/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this talkgroup:
(set to 0 if not needed)

Quick setup

C4FM/ DMRplus / MARC/ TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Link reflector/talkgroup (set to 0 if not needed):

Quick setup

C4FM/REF/XRF

Server:
Module:
Callsign:

Quick setup

C4FM/DCS/XLX

Server:
Module:
Callsign:

Quick setup

C4FM/Gateway

Server:
Module:
Callsign:

Quick setup

C4FM/NXDNReflector

Server:
Callsign:

Quick setup

C4FM/P25Reflector

Server:
Callsign:

Quick setup

C4FM/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

C4FM/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General NXDN settings

Radio frequency (MHz):
Radio Access Number (RAN):
Do you have voice quality issues? Run
Please select the network/server type to continue.

Quick setup

NXDN/NXDNReflector

Server:
Callsign:

Quick setup

NXDN/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this talkgroup:
(set to 0 if not needed)

Quick setup

NXDN/ DMRplus / MARC / TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Link reflector/talkgroup (set to 0 if not needed):

Quick setup

NXDN/REF/XRF

Server:
Module:
Callsign:

Quick setup

NXDN/DCS/XLX

Server:
Module:
Callsign:

Quick setup

NXDN/Gateway

Server:
Module:
Callsign:

Quick setup

NXDN/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

NXDN/YSFReflector

Server:
Callsign:

Quick setup

NXDN/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

NXDN/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General P25 settings

Radio frequency (MHz):
Network Access Code (NAC):
Do you have voice quality issues? Run
Please select the network/server type to continue.

Quick setup

P25/P25Reflector

Server:
Callsign:

Quick setup

P25/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

P25/YSFReflector

Server:
Callsign:

Quick setup

P25/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

P25/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General POCSAG settings

POCSAG frequency (MHz):

DAPNET

Server:
Callsign:
Transmitter auth key: (show)

Quick setup

APRS settings

Server:
Callsign:

Device location

QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (ASL, meters):
Location symbol on map (select):
Location comment:

Welcome!

Thank you for using the openSPOT4!
This initialization setup helps you connect your device to a Wi-Fi network.
Please select the country of operation:

Wi-Fi setup

Please choose a Wi-Fi network to connect.
No scan results available.

Connecting...

Connected!

The openSPOT4 is now connected to the Wi-Fi network:
You can continue setting up your openSPOT4 by clicking on the Next » button.
Important note: access point (AP) mode will be turned off after clicking on the Next » button.
● Your browser device (phone/tablet/computer) will disconnect from the openSPOT4's Wi-Fi network.
● The openSPOT4 will stay connected to the Wi-Fi network .
● You have to connect your browser device back to the Wi-Fi network . If the openSPOT4's web interface does not reconnect automatically, then use sharkrf.link to open it.